All Natural and Food Safe Finishes | Fusion

Food Safe, No Chemicals, NO VOC’s & Biodegradable.

Hemp Oil Wood Finish is all natural and very easy to apply. Simply pour or brush on and wipe away the excess with a rag.

500 ml – Covers approximately 80 square feet

  • Food Safe
  • No Chemicals
  • No additives or preservatives
  • NO VOC’s
  • Biodegradable
  • 100% Natural Hemp seeds

Bees/Hemp Oil Wax Blend

HOW TO USE IT

Apply liberally with a wax brush or lint free rag. All to sit on the wood for 5-10 minutes then remove excess by buffing with a lint free cloth. Re-apply as needed.

Will richen up reclaimed wood to a beautiful natural wood tone. The older the wood the deeper the tone.

Dry time: 8-12 hours – can be longer if not buffed enough | Re-coat time: as desired | Cure time: 30 days
 

DID YOU KNOW?

There are no solvents in this product, just pure beeswax and hemp oil.

Loved by woodworkers worldwide – many indicate that this gives one of the most unique finishes to aged wood.
 

WHAT ELSE CAN IT BE USED FOR?

Wooden kitchen cooking utensils

Cutting Boards

Over top of painted finishes to increase the sheen

QUICK TIP – using this amazing finish on top of a dark color, such as our Coal Black will prevent marks from showing!


MAINTENANCE:
Apply as needed.

CURING:
30 days to fully cure.

What is the difference between Beeswax Finish and the regular Furniture Wax?

Our Beeswax Finish is a food-safe blend of beeswax and hemp oil and comes in a single color. Our Furniture Wax comes in 8 colors and is made of a blend of beeswax and carnauba wax.

Can I use Beeswax Finish on my butcher’s block?

Yes! That’s a great use for it. Beeswax Finish is food safe and a great water-resistant finish for a butcher’s block.

Can I use Beeswax Finish over Fusion Mineral Paint?

Yes you can. Beeswax Finish gives a beautiful satin sheen over Fusion Mineral Paint.

Can I use Fusion Mineral Paint over Beeswax Finish?

No, unfortunately not. Any wax will need to be removed first with mineral spirits.

What else can I use Beeswax Finish for?

Beeswax Finish makes a great resist to make distressing easy, kind of like our Beeswax Distressing Block. You can also use Beeswax Finish on your leather shoes to revive the leather, condition it, and bring back its natural luster.

Check this post for more information: https://fusionmineralpaint.com/beeswax-finish-2/

Our Beeswax Finish is unique to Fusion™, and contains only pure natural beeswax and hemp oil. It is a food safe, all natural product, providing a soft smooth satin finish. It will maintain that gorgeous satin luster for a very long time! Beeswax Finish can be used over Fusion Mineral Paint ™ to add a satin finish and reduce the look of scuffs and fingerprints, especially on the darker colors. It may also be used on wooden surfaces to enhance and protect. 

Application Tool Brush, lint free rag
Location Interior low traffic surfaces
Re-coat Time As needed – if the wood looks dry, apply more.
Dry Time 1 – 7 days
Top Coat None recommended. Was is always last.
Clean Up Odorless Solvent
Coverage 150-300 sq. ft.
Finish/Sheen Matte to high sheen. Each additional layer and buffing increases the sheen.
Recommended Uses Food safe surfaces such as cutting boards, reclaimed wood or Milk Painted pieces.
Can Be Applied To All waterabased or oil based finishes for increased luster or accenting. Painted surfaces, Tough Coat, Stained surfaces like Stain & Finishing Oil, Gel Stain & Top Coat.
Can Be Painted Over No
How to Prep Apply over any surface or top coat for desired effect
Cure Time 30 Days
Maintenance/ Cleaning Light cleaners, as they will strip away the wax.

 

Fusion Mineral Paint